Stenor Hose Repair
The Stenor Merlin vulcaniser was specially developed for the repair of type 1, 2 & 3 fire hose.
The factors needed for a successful repair are hose preparation, patch shelf life, correct pressure, time and temperature. The Stenor Merlin features adjustable pressure, adjustable platen temperature and repeatability once the machine has been set for a given type of hose.
Heating unit platen is heated by semi-conductor PTC element. These responsive elements reduce their power output as their temperature increases.
- Short pre-heat time
- Long Element Life
- Minimal Temperature “overshoot”
- Fail safe operation, the platen temperature will not exceed 190oC in the absence of any control.
Timer with digital display controls both heating and cool down time and sounds an alarm when total cycle is complete. The timer turns off power supply to the heating unit, so the vulcaniser can be safely left unattended.
Also available; hose clamps, patches and complete hose preparation kits.