Filling Instructions for Foam Extinguishers

To fill the foam extinguishers please follow the steps as listed below:

 

  1. Unscrew the extinguisher head
  2. Add 8.4 litres of water first
  3. Add 600ml foam (total 9 litres - there is a mark on the pickup tube to indicate the correct level.)
  4. Re-seal the head assembly by screwing down.
  5. Apply air pressure to the tyre type value in the head until the pressure gauge goes into the green.

Download PDF here

 



PSL News

FEATURED POSTS

Town’s Fire Siren To Be Reinstated

Town’s Fire Siren To Be Reinstated

by Lee Gilson on April 25, 2022

The North Canterbury community of Oxford is celebrating a...

Fire Suppression Systems on Auckland City Rail Link

Fire Suppression Systems on Auckland City Rail Link

by Lee Gilson on September 14, 2021

As the City Rail Link (CRL) is still operating...

Crusader Hose – Fire-hose testing is critical

Crusader Hose – Fire-hose testing is critical

by Lee Gilson on July 21, 2021

Fire-hose testing is a very important requirement, particularly for...

Wellington Airport get Bristol X-Flex uniforms supplied by PSL Fire & Safety

Wellington Airport get Bristol X-Flex uniforms supplied by PSL Fire & Safety

by Lee Gilson on June 22, 2021

Wellington airport  is a major domestic and international airport...

Back to top